Additional Information
masterpage:Right
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB09ADD_STR-DE497-
EL.fm]
model name1[STR-DE497]
[4-252-084-13(1)]
47
GB
AM tuner section
Tuning range
Models of area code E2/E3
With 10-kHz tuning scale: 530 – 1,610 kHz
6)
With 9-kHz tuning scale: 531 – 1,602 kHz
6)
Models of area code CEL, CEK, SP, AU, TW, KR
With 9-kHz tuning scale: 531 – 1,602 kHz
Antenna Loop antenna
Intermediate frequency 450 kHz
Usable sensitivity 50 dB/m (at 1,000 kHz or
999 kHz)
S/N 54 dB (at 50 mV/m)
Harmonic distortion 0.5% (50 mV/m, 400 Hz)
Selectivity
At 9 kHz: 35 dB
At 10 kHz: 40 dB
6) You can change the AM tuning scale to 9 kHz or 10
kHz. After tuning in any AM station, turn off the
receiver. While holding down PRESET TUNING +
or TUNING +, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
General
Power requirements
Power consumption
Power consumption (during standby mode)
0.3 W
Dimensions (w/h/d) (Approx.)
430 × 145 × 310.5 mm
including projecting parts
and controls
Mass (Approx.) 7.5 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-U306B (1)
R6 (size-AA) batteries (2)
Design and specifications are subject to change
without notice.
Area code Power requirements
CEL, CEK 230 V AC, 50/60 Hz
SP, KR 220 – 230 V AC,
50/60 Hz
E2/E3 120/220/240 V AC,
50/60 Hz
AU 240 V AC, 50 Hz
TW 110 V AC, 50/60 Hz
Area code Power consumption
CEL, CEK, SP, AU,
E2/E3, KR
180 W
TW 440 W
For details on the area code of the component you
are using, see page 3.
GB01COV_STR-DE497-CEL.book Page 47 Friday, July 16, 2004 2:34 PM
To Next Page
Loading...
