Sony STR-DE545 Operating Instructions (Receiver) User Manual

53
Additional Information
1 Hold down the Function button whose function you
want to change (for example, MD/TAPE).
2 Press the corresponding button of the component
you want to assign to the Function button (for
example, 1 - CD player).
The following buttons are assigned to select the functions:
* Sony VCRs are operated with a VTR 1, 2 or 3 setting.
These correspond to Beta, 8mm and VHS respectively.
Now you can use the MD/TAPE button to control a
second CD player.
To change the AUX function to another function
Hold down SLEEP and press the corresponding button of the
component you want to assign it to.
To change the 5.1 CH function to another function
Hold down AV ?/1 and press the corresponding button of the
component you want to assign it to.
To reset a button to its factory setting
Repeat the above procedure.
To reset all the function buttons to their factory setting
Press ?/1, AV ?/1 and MASTER VOL – at the same time.
To operate
CD player
DAT deck
MD deck
Tape deck A
Tape deck B
LD player
VCR (remote control mode VTR 1*)
VCR (remote control mode VTR 2*)
VCR (remote control mode VTR 3*)
TV
DSS (Digital Satellite Receiver)
DVD
VCD player
Press
1
2
3
4
5
6
7
8
9
0
>10
ENTER
.

Sony STR-DE545 Operating Instructions (Receiver) Specifications

General

Brand	Sony
Model	STR-DE545 Operating Instructions (Receiver)
Category	Stereo Receiver
Language	English