Sony STR-DE595 - Fm Stereo/fm-am Receiver User Manual

Amplifier Section
• Black Finish A/V Receiver
• 5 Channel Power Rating: 100
Watts Per Channel x 5 (8
ohms 1 kHz, THD 0.7%)
• Dolby® Digital, dts®, Dolby®
Pro Logic® II Decoding
• 32-bit Dolby® Digital,Dolby®
Pro Logic® and dts® decoder
• 32-bit DSP with 11 Acoustic
Environments
• Digital Cinema Sound™ System
with Cinema Studio EX modes
• Sound Field Modes (Movie,
Music, AFD, 2 Channel):
Movie: 3 Modes;
Music: 3 Modes;
AFD: 4 Modes;
2 Channel: 1 Mode
• Station Presets: 30 Total
• A & B/A or B Speaker Switch
• Sound Field Link
• Circuit Device (Discrete)
Inputs and Outputs
• Multi-Channel IN (Analog)5.1
Channel Input
• Headphone Jack
1
/4" Jack
• Analog Audio Input x 2
• Analog Audio Output x 1
• Optical Digital Input x 2
• Coaxial Digital Input x 1
• Pre-Out x 1 (Subwoofer)
• Composite Video Input x 3
• Composite Video Output x 1
• Component Video Input x 2
(HD Pass 80 MHz)
• Component Video Output x 1
(HD Pass 80 MHz)
• Monitor Out x 1
(Composite)
• AC Outlet (switched) x 1
Convenience Features
• UniCommander® Pre-
Programmed Remote Control
• 5 Channel Power Rating:100W Per Channel x 5 (8 ohms 1 kHz,THD 0.7%)
• Dolby® Digital, dts®, Dolby® Pro Logic® II Decoding
• A & B / A or B Speaker Switch
• 2 Component Video Inputs: HD Pass (80 MHz)
• UniCommander® Remote Control
• 5.1 Multi-Channel Analog Input
STR-DE595
Receiver
Key Features
Additional Features
Preliminary and Confidential
S = Step-Up Feature

Sony STR-DE595 - Fm Stereo/fm-am Receiver Specifications

General

Tuning Range	FM: 87.5 - 108 MHz, AM: 530 - 1710 kHz
Number of Channels	5.1
Total Harmonic Distortion (THD)	0.09%
Weight	7.5 kg
Frequency response	10Hz-100kHz
Input sensitivity	200 mV
Weight (kg)	7.5
Type	FM stereo/AM receiver
Power Output	100 W per channel (8 ohms)
Inputs	video 1, video 2
Outputs	tape, video 1, video 2
Dimensions	430 x 145 x 330 mm
Speaker load impedance	8 ohms
Video Connections	Composite video

Summary

Key Features

5 Channel Power Output

100W per channel x 5 at 8 ohms, 1kHz, THD 0.7%.

Audio Decoding Support

Supports Dolby Digital, DTS, and Dolby Pro Logic II decoding.

Speaker A/B Switching

Allows selection between speaker sets A, B, or both.

Component Video Inputs (HD Pass)

Features two component video inputs with 80 MHz HD pass-through.

UniCommander Remote Control

Includes a pre-programmed UniCommander remote for easy operation.

5.1 Multi-Channel Analog Input

Provides a 5.1 multi-channel analog input for connectivity.

Additional Features

Amplifier Section Details

Covers amplifier specs like power rating, finish, and digital processing.

Audio/Video Inputs and Outputs

Lists all available ports including optical, coaxial, composite, and component.

Convenience Features Overview

Highlights UniCommander remote and other user-friendly aspects.

Component Video Switching

Video Switching Capabilities

Details on 2 component video inputs and 1 output with 80 MHz bandwidth for signal integrity.

Specifications

Amplifier Specifications

Provides detailed power ratings, tuning ranges, input sensitivity, and frequency response.

Video Specifications

Lists input sensitivity and impedance for composite and component video signals.

General Specifications

Includes power requirements, consumption, and standby power usage.

Supplied Accessories

Lists items included with the receiver, such as remote, antennas, and manual.

Weights & Measures

Provides approximate dimensions and weight of the unit.