Sony STR-DE885 - User Manual

Other manuals for Sony STR-DE885

Service Manual72 pages

Specifications2 pages

Dimensions1 page

Questions and Answers

M
Meghan OwenSep 9, 2025
Why radio stations cannot be tuned in on my Sony Stereo Receiver?
- J
  Julie JacksonSep 9, 2025
  To address the issue of radio stations not tuning in on your Sony Stereo Receiver, begin by confirming that the antennas are securely connected. If the signal strength is weak, try using direct tuning. When tuning AM stations with direct tuning, ensure you've set the tuning interval correctly. If tuning by scanning preset stations, preset the stations. Finally, press DISPLAY to ensure the frequency is visible on the display.
L
lindsay81Sep 8, 2025
What to do if my Sony Stereo Receiver remote does not function?
- D
  Daniel MartinSep 8, 2025
  If your Sony Stereo Receiver remote isn't working, first point the remote at the remote sensor on the receiver. Check that the remote's mode matches the receiver's settings. Remove any obstructions between the remote and the receiver. If the batteries are weak, replace them with new ones.
M
michael22Sep 7, 2025
Why is there severe hum or noise coming from my Sony Stereo Receiver?
- V
  Vincent BaileySep 7, 2025
  If you're experiencing severe hum or noise with your Sony Stereo Receiver, start by checking that the speakers and components are securely connected. Ensure connecting cords are kept away from transformers, motors, and are at least 3 meters away from TVs or fluorescent lights. Try moving your TV away from the audio components. If you have a turntable connected, ensure the U SIGNAL GND terminal is grounded. Lastly, clean the plugs and jacks with a cloth slightly moistened with alcohol.
K
Kristen WilliamsAug 22, 2025
What to do if there is no sound on my Sony Stereo Receiver?
- C
  Christine RodriguezAug 22, 2025
  If there is no sound or a very low-level sound regardless of the selected component on your Sony Stereo Receiver, verify that the speakers and components are securely and correctly connected. Ensure both the receiver and all components are powered on, and the MASTER VOLUME isn't set to VOLUME MIN. Also, check the SPEAKERS A/B button to ensure it's correctly set for your SPEAKERS FRONT system. Press MUTING to disable the muting function, and ensure headphones are disconnected. If 'PROTECT' flashes, it indicates a short circuit; turn off the receiver, resolve the short-circuit, and then turn it back on.
J
jeremygrahamSep 5, 2025
How to fix recording issues on Sony Stereo Receiver?
- S
  sarahthompsonSep 5, 2025
  To resolve recording issues with your Sony Stereo Receiver, verify that all components are correctly connected. Select the source component using the FUNCTION control. Before recording from a digital component connected to the analog MD/TAPE terminals, ensure INPUT MODE is set to 'ANALOG 2CH FIXED'. When recording from a digital component connected to the DIGITAL MD/TAPE OUT terminals, make sure INPUT MODE is set to 'COAXIAL FIXED' or 'OPTICAL FIXED'.
T
travis76Sep 3, 2025
What to do if there is no sound from one of the front speakers on my Sony Stereo Receiver?
- C
  Corey AlexanderSep 3, 2025
  To troubleshoot the absence of sound from one of the front speakers of your Sony Stereo Receiver, first connect headphones to the PHONES jack to check if sound is output there. If only one channel outputs through the headphones, the component might not be correctly connected; ensure all cords are fully inserted into the jacks on both the receiver and the component. If both channels output through the headphones, the front speaker may not be connected correctly; check the connection of the front speaker that isn't producing sound.
T
Tiffany MillsSep 2, 2025
Why is there no picture on my Sony Stereo Receiver?
- A
  Anne Hernandez DDSSep 2, 2025
  If there is no picture or an unclear picture on the TV screen or monitor connected to your Sony Stereo Receiver, select the appropriate function on the receiver. Set your TV to the appropriate input mode. Move your TV away from the audio components.
J
John TaylorSep 1, 2025
What to do if center or surround speakers have no sound on my Sony Stereo Receiver?
- M
  Megan SteeleSep 1, 2025
  If there's no sound or a very low-level sound from the center or surround speakers on your Sony Stereo Receiver, ensure the sound field function is enabled by pressing MODE (SOUND FIELD). Select a sound field containing 'CINEMA STUDIO EX'. Adjust the speaker level. Also, make sure the center or surround speaker size parameter is set to either 'SMALL' or 'LARGE'.
J
John VaughnAug 31, 2025
How to fix unbalanced sound on Sony Stereo Receiver?
- T
  tanya89Aug 31, 2025
  If the left and right sounds are unbalanced or reversed on your Sony Stereo Receiver, ensure that the speakers and components are connected correctly and securely. If the issue persists, adjust the balance parameters in the LEVEL menu.
D
Dustin FullerAug 29, 2025
Why is Dolby Digital or DTS not working on my Sony Stereo Receiver?
- T
  Timothy DavisAug 30, 2025
  If you're not getting Dolby Digital or DTS multi-channel sound from your Sony Stereo Receiver, first check that the DVD or other source material is actually recorded in Dolby Digital or DTS format. When connecting a DVD player to the receiver's digital input jacks, verify the audio settings (audio output settings) of the connected component.

Summary

Safety and Precautions

Hooking Up the Components

Antenna Hookups

Instructions for connecting FM and AM antennas to the receiver.

Audio Component Hookups

Diagrams and instructions for connecting audio sources like turntables, CD players, and tape decks.

Video Component Hookups

Guidelines for connecting video sources like TVs, VCRs, and DVD players.

Digital Component Hookups

How to connect digital audio sources like DVD and satellite tuners for surround sound.

Hooking Up and Setting Up the Speaker System

Speaker System Hookups

Connecting front, surround, center, and subwoofer speakers to the receiver.

Performing Initial Setup Operations

Clearing the Receivers Memory

Resetting all receiver settings to factory defaults.

Specifying the Speaker Parameters

Adjusting speaker settings like size, distance, and crossover frequencies.

Front Speaker Size

Setting the size (LARGE/SMALL/NO) for front speakers and its implications.

Center Speaker Size

Setting the size (LARGE/SMALL/NO) for the center speaker.

Surround Speaker Size

Setting the size (LARGE/SMALL/NO) for surround speakers.

Sub Woofer Selection

Selecting YES or NO for sub woofer connection and its effect on bass redirection.

Front Speaker Distance

Setting the distance from listening position to front speakers.

Center Speaker Distance

Setting the distance from listening position to the center speaker.

Surround Speaker Distance

Setting the distance from listening position to surround speakers.

Adjusting the Speaker Level

Checking the Connections

Verifying that all component and speaker connections are correct.

Basic Operations

Selecting the Component

Choosing the input source or component to use.

Enjoying Surround Sound

Automatically Decoding the Input Audio Signal

Auto-detecting and decoding various audio signal formats.

Selecting a Sound Field

Choosing from pre-programmed sound fields for different listening experiences.

Enjoying Movies with Cinema Studio EX

Using Cinema Studio EX modes to reproduce movie theater sound characteristics.

Selecting Other Sound Fields

Choosing from a variety of sound fields like Mono Movie, Stereo Movie, Concert Hall, etc.

Selecting the Surround Back Decoding Mode (SURR BACK DECODING)

Choosing the decoding mode for surround back signals for 6.1 channel sound.

Customizing Sound Fields

Adjusting the Surround Parameters

Customizing surround effects like effect level, wall type, and reverberation.

Effect Level

Adjusting the overall presence of the surround effect.

Adjusting the Level Parameters

Front Balance

Adjusting the balance between front left and right speakers.

Dynamic Range Compressor

Adjusting the Equalizer

Adjusting bass, midrange, and treble for each speaker and sound field.

Surround Speaker Adjustments

Adjusting bass and treble levels for surround and surround back speakers.

Receiving Broadcasts

Direct Tuning

Manually entering radio station frequencies for tuning.

Automatic Tuning

Scanning for available radio stations automatically.

Preset Tuning

Other Operations

Adjustments using the CUSTOMIZE button

2 ch Decode Mode

Surround Back Decoding Mode

Operations Using the Remote

Remote Button Description

Overview of buttons on the RM-PG411 and RM-PP411 remotes.

Programming the Remote

Learning remote control codes for non-Sony or unsupported components.

Learning the Commands of Your Components

Activating Learned Functions

Performing Several Commands in Sequence Automatically (Macro Play)

Additional Information

Precautions

Safety, power source, heat, placement, operation, and cleaning guidelines.

Troubleshooting

Common problems and solutions for audio, connection, and recording issues.

Specifications

Audio Power Specifications

Details on power output, harmonic distortion, and frequency response.

AM Tuner Section

Tables of Settings using SURR, LEVEL, EQ, SET UP and CUSTOMIZE Buttons

LEVEL Button Settings

EQ Button Settings

SET UP Button Settings

CUSTOMIZE Button Settings

Sony STR-DE885 Specifications

General

Channels	5.1
Total Harmonic Distortion (THD)	0.09 %
Frequency Response	10 Hz - 100 kHz
Inputs	4 x Audio, 2 x Digital Optical, 2 x Digital Coaxial, 1 x Phono, 1 x Video
Weight	13.2 kg
Input sensitivity	200 mV
Output	100 W per channel
Speaker load impedance	8 ohms
Speaker Impedance	8 ohms
Preset Stations	30
Tuning range	AM/FM
Power Output (RMS)	100W per channel
Power output	100W per channel
Outputs	1 x Audio, 1 x Video
Signal to noise ratio	> 98 dB
Digital inputs	coaxial, optical
Dimensions	43 cm x 40.1 cm x 15.75 cm
Signal-to-Noise Ratio	> 98 dB
Tuner Type	AM/FM
Audio Inputs/Outputs	4 x Audio Inputs, 1 x Audio Output
Digital Audio Inputs	Coaxial, Optical
Video Inputs/Outputs	3 inputs, 1 output