To Next PageTo Next Page
Need help?Do you have a question about the Sony STR-DE895 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Total Harmonic Distortion (THD) | 0.09% |
| Digital inputs | 2 optical, 1 coaxial |
| Channel Separation | 50 dB |
| Power Output | 100 watts per channel (8 ohms, 20 Hz - 20 kHz, THD 0.09%) |
| Tuning range | FM: 87.5-108 MHz, AM: 530-1710 kHz |
| Frequency Response | 10 Hz - 100 kHz |
| Speaker load impedance | 8 ohms |
| Video Connections | composite |
Lists necessary optional connection cords for hooking up components.
Details connecting FM and AM antennas to the receiver.
Illustrates connecting audio sources like turntables and CD players.
Shows how to connect video sources like satellite tuners and DVD players.
Explains connecting digital audio sources for surround sound.
Covers connecting external multi channel decoders or DVD players.
Details connections like CONTROL S, CONTROL A1II, and 2ND ZONE.
Guides on connecting speakers, including notes on wiring and short-circuit prevention.
Covers clearing receiver memory and performing initial system adjustments.
Details speaker placement, distance, and size settings for surround sound.
Explains how to select input sources using INPUT SELECTOR and INPUT MODE.
Describes using the 2ND ZONE OUT jacks for audio output to another room.
Covers adjusting display brightness and information shown using DIMMER and DISPLAY buttons.
Explains activating 2CH STEREO mode for stereo playback.
Details using A.F.D. AUTO mode for automatic audio signal decoding.
Guides on choosing pre-programmed sound fields for different listening experiences.
Covers adjusting individual speaker volume and balance levels.
Explains adjusting dynamic range, equalizer, and resetting sound fields.
Instructions for entering specific FM/AM station frequencies directly.
Explains scanning for available FM/AM stations automatically.
Guides on saving and recalling FM/AM stations using preset numbers.
How to assign custom names (index names) to stations and sources.
Instructions for recording audio or video from various sources.
How to set the receiver to automatically turn off after a specified time.
Details various settings like surround back decoding, power save, and digital assignment.
Introduces the CONTROL A1II system for integrated component operation.
Explains how the system automatically selects inputs based on component activity.
Guides on performing synchronized recording between components.
Identifies buttons and their functions for the RM-PP412 and RM-PG412 remotes.
How to switch the remote's operational mode between AV1 and AV2.
Instructions for programming the remote to control other components.
Process for teaching the remote new commands from other remotes.
How to create sequences of commands for automated playback.
Identifies buttons and their functions for the RM-LG112 remote.
How to switch the remote's operational mode between AV1 and AV2.
Instructions for programming the remote to control other components.
Process for teaching the remote new commands from other remotes.
How to create sequences of commands for automated playback.
Safety, power, heat, placement, and cleaning guidelines for the receiver.
Common issues and solutions for sound, reception, and remote control problems.
Technical details on power output and harmonic distortion.
Technical performance data for FM and AM tuning.
Electrical characteristics for various audio and video inputs/outputs.
Reference tables for adjustable parameters found in menus.
