Sony STR-DE895 - Specifications; Audio Power Specifications

70
GB
STR-DE995/895 4-244-963-11(1)GB
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09 % total harmonic distortion from 250
milliwatts to rated output (Models of area code
U only).
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
100 W + 100 W
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
1)
: 100 W/ch
CENTER
1)
: 100 W
SURR
1)
: 100 W/ch
SURR BACK
1)
: 100 W/ch
3)
or 100 W
4)
(8 ohms 1 kHz, THD 0.7 %)
FRONT
1)
: 110 W/ch
CENTER
1)
: 110 W
SURR
1)
: 110 W/ch
SURR BACK
1)
: 110 W/ch
3)
or 110 W
4)
Models of area code E2/E3, MX
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
110 W + 110 W
2)
Reference Power Output
2)
(8 ohms 1 kHz, THD 10 %)
FRONT
1)
: 130 W/ch
CENTER
1)
: 130 W
SURR
1)
: 130 W/ch
SURR BACK
1)
: 130 W/ch
3)
or 130 W
4)
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Area code Power requirements
E2/E3 240 V AC, 50 Hz
3) STR-DE995 only.
4) STR-DE895 only.
Frequency response
PHONO RIAA equalization curve
±0.5 dB
MULTI CH IN (1, 2), 10 Hz – 70 kHz
CD/SACD, TV/SAT, +0.5/–2 dB (with sound
MD/TAPE, DVD, field and equalizer
VIDEO 1, 2, 3 bypassed)
Inputs (Analog)
PHONO Sensitivity: 8 mV
Impedance: 50 kilohms
S/N
5)
: 86 dB (A, 8 mV
6)
)
MULTI CH IN (1, 2), Sensitivity: 500 mV
CD/SACD, TV/SAT, Impedance: 50 kilohms
MD/TAPE, DVD, S/N
5)
: 96 dB
VIDEO 1, 2, 3 (A, 500 mV
6)
)
5) INPUT SHORT (with sound field and equalizer
bypassed).
6) Weighted network, input level.
Inputs (Digital)
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
TV/SAT, CD/SACD, Sensitivity: –
MD/TAPE, VIDEO 3 Impedance: –
(Optical) S/N: 100 dB
(A, 20 kHz LPF)
Outputs (Analog)
MD/TAPE (OUT), Voltage: 500 mV
VIDEO 1, 2 Impedance: 10 kilohms
(AUDIO OUT)
SUB WOOFER Voltage: 2 V
Impedance: 1 kilohms
Outputs (Digital)
MD/TAPE (Optical) Sensitivity: –
EQUALIZER
Gain levels: ±10 dB, 0.5 dB step