Sony STR-DE975 - Specifications

57
Additional Information
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION:
With 8 ohm loads, both
channels driven, from 20 -
20,000 Hz; rated 110 watts
(STR-DE975) and 100 watts
(STR-DE875) per channel
minimum RMS power,
with no more than 0.09 %
total harmonic distortion
from 250 milliwatts to
rated output (USA model
only).
Amplifier section
Rated Power Output at Stereo mode
(8 ohms 20 Hz - 20 kHz,
THD 0.09%)
STR-DE975:
110 W + 110W
STR-DE875:
100 W + 100W
Reference Power Output
(8 ohms at 1 kHz, THD
0.7%)
STR-DE975:
Front
1)
: 110 W/ch
Center
1)
: 110 W
Surround
1)
: 110 W/ch
STR-DE875:
Front
1)
: 100 W/ch
Center
1)
: 100 W
Surround
1)
: 100 W/ch
1) Depending on the sound field settings and
sources, there may be no sound output.
Frequency response
PHONO: RIAA
equalization curve
±0.5 dB
MULTI CH IN,
CD/SACD,
MD/DAT*,
MD/TAPE**,
DVD/LD, TV/SAT,
VIDEO 1, VIDEO 2
VIDEO 3*:
10 Hz - 50 kHz +0.5/
–2 dB (with sound
field and equalizer
bypassed)
Inputs (Analog)
PHONO:
Sensitivity: 4.0 mV
Impedance:
50 kilohms
S/N
a)
: 86 dB
(A, 4.0 mV
b)
)
MULTI CH IN,
CD/SACD,
DVD/LD,
MD/DAT*,
MD/TAPE**,
TV/SAT, VIDEO 1,
VIDEO 2 VIDEO 3*:
Sensitivity: 250 mV
Impedance:
50 kilohms
S/N
a)
: 96 dB
(A, 250 mV
b)
)
a) Input short.
b) Weighted network, input level.
Inputs (Digital)
DVD/LD (coaxial):
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
DVD/LD, TV/SAT,
MD/DAT*,
MD/TAPE**
(Optical):
Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Outputs MD/DAT*,
MD/TAPE** (OUT);
VIDEO 1, VIDEO 2:
(AUDIO OUT):
Voltage: 250 mV,
Impedance: 10
kilohms
SUB WOOFER:
Voltage: 2 V
Impedance: 1
kilohms
PHONES:
Accepts low- and
high-impedance
headphones
EQ BASS:
99 Hz~1.0 kHz
(21 steps)
MID:
198 Hz~10 kHz
(37 steps)
TREBLE:
1.0 kHz~10 kHz
(23 steps)
Gain levels:
+6/–10 dB, 1dB step
Sampling Frequency
48 kHz (TV/SAT,
MD/DAT*,
MD/TAPE**
OPTICAL IN)
96 kHz (DVD/LD
OPTICAL IN,
COAXIAL IN)
* STR-DE975 only
** STR-DE875 only