Canceling pairing operation
Pairing operation will be canceled when you switch the input.
Note
Some applications of BLUETOOTH device cannot be controlled from the receiver.
If a passkey is required on the display of the BLUETOOTH device in step 4, enter [0000]. The
passkey may be called “Passcode,” “PIN code,” “PIN number” or “Password.”
You can pair up to 9 BLUETOOTH devices. If a 10th BLUETOOTH device is paired, the least
recently connected device will be replaced by the new one.
CONNECTION
PAIRING BLUETOOTH on the receiver does not work when the [Bluetooth Mode]
is set to [Off].
Hint
You can change the name of the receiver that appears on your device in [Device Name] in the
[System Settings] menu.
[109] Using BLUETOOTH Features Enjoying audio content stored on a BLUETOOTH device
Controlling a BLUETOOTH device using the remote
control
You can operate a BLUETOOTH device using the following buttons on the remote control:
(*): Starts or pauses playback.
: Stops playback.
/ : Moves to the start of the previous/current or next track.
Note
These operations may not be available for certain BLUETOOTH devices. The actual operations may
also differ depending on the connected BLUETOOTH device.
If [STR-DN1080 XXXXXX] (*) is not displayed, repeat this process from step 1.
When the BLUETOOTH connection is established, the paired device name appears and
[BT] lights up on the display panel.
Start playback on the BLUETOOTH device.
5
Adjust the volume.
Adjust the volume of the BLUETOOTH device first. If the volume level is still too low, adjust
the volume level of the receiver.
6
XXXXXX is the identification number for each unit.
*
If you press when no BLUETOOTH device is connected, the receiver automatically connects to the last
connected BLUETOOTH device.
*
To Next Page
Loading...
