Sony STR-DN1080 - Page 147

Note
This function does not work in the following cases:
[Pure Direct] is set to [On].
[Bluetooth Mode] is set to [Transmitter].
[DSD Native] is set to [On] and DSD signals are being played back.
Frequencies for [Bass] and [Treble] are fixed.
Depending on the audio format, the receiver may play signals at a lower sampling frequency than the
original sampling frequency of the input signals.
Only [Bass] gain and [Treble] gain are available for [Front] when headphones are connected.
Hint
You can also select [Equalizer] in [Sound Effects] from the home menu. Additionally, you can adjust
the equalizer from the [<EQ>] menu on the display panel by pressing AMP MENU.
[160] Adjusting Settings Speaker Settings
Adjusting the speaker distance (Distance)
You can adjust the distance from where you are sitting to each speaker (front left/right, height
left/right, center, surround left/right, surround back left/right, subwoofer).
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Equalizer].
2
Select [Front], [Center], [Surround] or [Height].
3
Select [Bass] or [Treble].
4
Adjust the gain.
5
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Distance].
2
Select the speaker whose distance you want to adjust from the following.
Front L, Center, Front R, Surround R, Surround L, Sur Back L, Sur Back (*), Sur Back R,
Height L, Height R, Subwoofer
3
[Sur Back] appears when only one surround back speaker is connected.
*