[89] Using Network Features Enjoying content stored on a server on the home network
(DLNA)
Deleting a server from the server list
If a server you do not usually use appears in the server list, you can delete it using this function.
Note
A server will appear in the server list even after being deleted from the list if the receiver finds it on
the network (such as when you
refresh the server list).
[90] Using Network Features Enjoying content stored on a server on the home network
(DLNA)
Setting whether to control this receiver from a
controller device on the home network (Home Network
Access Control)
You can check a list of products compatible with a controller on the home network and set
whether or not each product is accessible via this receiver.
Select [Setup] - [Network Settings] from the home menu.
1
Select [Connection Server Settings].
2
Select the server which you want to delete and press OPTIONS.
3
Select [Remove] from the options menu.
4
Select [OK] on the confirmation display.
[The device has been removed from the list.] appears on the TV screen, and the selected
server is deleted.
5
Select [Setup] - [Network Settings] from the home menu.
1
Select [Home Network Access Control].
A list of registered controllers appears (up to 20 devices).
2
To Next Page
