Sony STR-DV10 - Selecting Surround Back Decoding Mode

Enjoying Surround Sound
masterpage:Right
lename[E:\SEM_Janet\Revision1_STR-
D
V10\J9050000_2560573121_US\2560573121\US05SND_STR-DV10-U.fm]
33
US
model name1[STR-DV10]
[2-560-573-12(1)]
This function lets you select the decoding mode
for the surround back signals of the multi
channel input stream.
By decoding the surround back signal of DVD
software (etc.) recorded in Dolby Digital EX,
DTS-ES Matrix, DTS-ES Discrete 6.1, etc.
format, you can enjoy the surround sound
intended by the filmmakers.
Press SURR BACK DECODING repeatedly
to select the surround back decoding
mode.
“SB XXXX” appears in the display.
For details, see “How to select the surround back
decoding mode” on page 34.
Tip
You can select the surround back decoding mode using
“SB XXXX” in the CUSTOMIZE menu (page 38).
Note
You can select the surround back decoding mode only
when A.F.D. mode is selected except for Dolby Pro
Logic IIx mode (page 29).
Selecting the surround
back decoding mode
— SURR BACK DECODING
continued
US01COV_STR-DV10-U.book Page 33 Monday, July 4, 2005 11:52 AM