Do you have a question about the Sony STR-DV10 and is the answer not in the manual?
Brand | Sony |
---|---|
Model | STR-DV10 |
Category | Stereo Receiver |
Language | English |
Describes how to connect your components to the receiver.
Illustrates connecting DVD players, TV monitors, or satellite tuners using digital audio.
Shows how to connect TV or satellite tuner and DVD player with component video jacks.
Explains how to connect MD/Tape decks and Super Audio CD/CD players.
Details connecting components with multi channel output jacks for multi channel sound.
Illustrates connecting DVD player and TV monitor with component video jacks.
Explains how to connect audio components using only analog audio jacks.
Instructions for connecting the supplied AM loop antenna and FM wire antenna.
Details on connecting speakers for a 7.1 channel system and enjoying surround sound.
Instructions for connecting the AC power cord to a wall outlet.
Procedure to initialize the receiver and return settings to factory defaults.
Guide to setting speaker size, distance, and location for optimal sound.
Details parameters like speaker size, subwoofer selection, and front speaker size.
How to select input sources like VCR, DVD, and Tuner.
Details on selecting and enjoying multi channel audio sources.
Details on achieving higher fidelity sound reproduction.
Allows selection of desired decoding mode for audio sound.
How the receiver automatically detects and decodes audio signals.
Specifies decoding types for 2-channel sources into multi channel.
Guide to selecting pre-programmed sound fields for immersive audio.
How to select sound fields optimized for movie playback.
How to select sound fields optimized for music playback.
How to adjust balance and level of each speaker.
How to adjust the tonal quality (bass, treble) of the front speakers.
Troubleshooting steps when no sound or low sound is output.
Steps to diagnose and fix no sound from a particular component.
Troubleshooting steps for a single front speaker not producing sound.