MICROFILM
SERVICE MANUAL
INTEGRATED AV AMPLIFIER
AEP Model
UK Model
Amplifier section
Power output
Stereo mode (DIN 1 kHz, 8 ohms)
25 W + 25 W
Surround mode (DIN 1 kHz, 8 ohms)
Front: 25 W/ch
Centre: 25 W
Rear: 25 W/ch
5.1 CH (DIN 1 kHz, 8 ohms)
INPUT/DVD mode Front: 25 W/ch
Centre: 25 W
Rear: 25 W/ch
Frequency response TV, VIDEO, DVD-2CH,
5.1 CH INPUT/DVD:
20 Hz-50 kHz ± 1 dB
Inputs
Sensitivity Impedance S/N
(weighting network, input level)
TV, VIDEO, DVD-2CH, 200 mV 50 82 dB*
5.1 CH INPUT/DVD kilohms (A, 150 mV)
*’78 IHF
Outputs VIDEO (AUDIO OUT):
Voltage 200 mV,
Inpedance 10 kilohms
WOOFER/AUDIO OUT:
Voltage: 2 V
Impedance: 1 kilohms
Muting Full mute
BASS BOOST +9 dB at 70 Hz
General
Power requirements 230 V AC, 50/60 Hz
Power consumption 115 W
Dimensions 430 × 274 × 64.5 mm
Mass (Approx.) 5.4 kg
Supplied accessories Remote controller
(remote) (1)
Size AA (R6) batteries (2)
Scart adaptor (1)
Design and specifications are subject to change without notice.
Specifications indicated are measured at 230 VAC, 50 HZ.
SPECIFICATIONS
TA-VE150
This amplifier has the Dolby Surround system.
Manufactured under license from Dolby Laborato-
ries Licensing Corporation.
“Dolby”, the double-D symbol a and “Pro Logic” are
trademarks of Dolby Laboratories Licensing Corpo-
ration.
To Next Page
Need help?
General
