Sony TC-200A - Technical Specifications

Power Requirement:
Tope Speeds:
Frequency Response :
Signol-te-Noise Rotio
Flutter ond Wow:
Erase Hood:
Record]/Playback Head :
Bias Frequency
Level Indication
Level Controls:
Tone Control:
ations
117 volts, 70 watts
60 cycles (50 cycles optional)
Instantaneous selection 75 ips or 3%/ ips
{19 oF 9.5 centimeters per second)
50-14,000 eps ot 7% ips
+£3b 50-10,000 eps at 715 ips
46 db
Less thon 0.19% of 75 ipe
Less than 0.25% at 3% ipe
Inline quarter track
Inline quarter trock
Approx. 55 Ke
Two Level Meters
Indivdyo Controls on each channel for
playback and record
1 Tone Contr for tel
‘operates both channel
boost oF roll-off
umultaneoutly.
Instont Stop Lever, Automatic Tope Lifters,
Fast Forword ond Rewind, Manual Cueing
‘ond Digital Tope Counter
7 inch or smaller
8 chm Speaker outputs or high impedance
fine ovtputs selectable by switch (2)
‘Auxiliary Record/Playback Connector (1)
1 Low impedence Microphone inputs (2)
High impedance Auxiliary inputs (2)
3,5" PM dynamic (2)
2x 1.5 watts (max)
6267 | x2}, 30A5 (x3)
TH128 (2)
1722 (2), 158125 (1)
+ Approx. 25.5 Ib.
1S.2°W x 14.1"H x 7.4"D.