Sony TC-FX205 - Page 9

Tape Speed Adjustment
Procedure: : | i
Mode: playback |
| speed checker
LFM-30
or
digital frequency
test tape counter
WS-48A
-(3kHz, OdB)
LINE OUT
Specification:
_ Digital frequency counter |
Frequency difference between the beginning
and the end of the tape should be within 0.8%
(25 Hz). |
Adjustment Location:
motor
Adjust the tape. speed by using screwdriver.
Playback Level Adjustment
Procedure:
Mode: playback
test tape
P-4-L 300
(315 Hz, OdB)
Specification:
LINE OUT level: 0.45 ~ 0.50 V.
(-4.9 ~ -3.9 dB)
Level difference between channels:
| less than 0.5 dB
Check that the LINE OUT level does not
change in playback mode while changing the
mode from playback to stop several times.
Adjustment Location:
LINE OUT