Sony TC-FX211 - Specifications

Specifications
4-track 2-channel stereo
Approx. 120 sec. (with Sony C-60
cassette)
Bias AC bias
Heads Erasing head x 1 (F&F head)
Playback/Recording head x 1
(SD head)
Motors Capstan/Reel motor x 1 (DC servo
motor)
Recording system
Fast winding time
Signal-to-noise ratio (at peak level)
Cassette | Type IV (Sony | Type Il Type |
(Dolby NR |METAL-S or | (Sony UX-S or | (Sony HF-S)
OFF) ES-IV) UX)
58 dB 57 dB 55 dB
Measured at peak level weighted without NR. The S/N is
improved by about 15 dB at 500 Hz and by about 20 dB at
about 1 kHz with Dolby-C NR on, and by 5 dB at 1 kHz and
by 10 dB at about 5 kHz with Dolby-B NR on.
Total Harmonic distortion
1.0% (with Sony Type IV)
Frequency response (Dolby NR OFF)
Type IV cassette 30 - 15,000 Hz (+3 dB, IEC)
(Sony METAL-S or | 30 - 13,000 Hz [+3 aB, (-4dB
ES-IV) recording)]
Type Il cassette i
(Sony UX-S or UX) 30 - 14,000 Hz (+3 dB, IEC)
Type | cassette
(Sony HF-S)
30 - 13,000 Hz (+3 dB, IEC)
Wow and flutter +0.16% W.Peak (IEC)
0.11% W.RMS (NAB)
+0.20% W.Peak (DIN)
Inputs
Line inputs Sensitivity | 77.5mV
i none eet) [Input impedance | 47 k ohms
Outputs
[Line outputs Rated output | 0.32 V at a load
(phono jacks) level impedance of
47 k ohms
Load Over 10 k ohms
impedance
Headphones Output level {0.2 mW ata load
(stereo phone jack) impedance of
Sf 32 ohms
General
Power requirements Model for the U.S.A.:
120 V AC, 60 Hz
Model for the United Kingdom and
Australia:
240 V AC, 50/60 Hz
Power consumption 14W
Dimensions Approx. 430 x 123 x 310 mm (w/h/d)
(17 x 47% x 121 inches)
including projecting parts and controls
Mass Approx. 3.1 kg (6 Ibs 14 0z)
Supplied accessories
Audio connecting cords (2)
Design and specifications are subject to change without
notice.
Note
This appliance conforms with EEC Directive 87/308/EEC
regarding interference suppression.
11