Sony TC-FX211 - Hooking up the System

Hooking Up the System
+ Turn off the power to all equipment to be connected before
making any connection.
* Note that the red plug of the supplied connecting cord is for
right-channel (R) connection and the white plug for left-
channel (L) connection.
* The connecting cords should be fully inserted into the jacks.
A loose connection may cause hum pickup.
Hook-up Example
2 +Signal flow
LINE IN LINE OUT
TC-FX211
to an AC outlet
for {| for
recording playback
Amplifier
REC OUT TAPE iNPUT
to a wail outlet
Befo ou Begin
ai
Hook-up for Tape Dubbing
— Signal tlow
TC-FX211
to a wail outlet
to another
tape deck
from another
tape deck
Another tape deck
LINE IN LINE OUT to an AC outlet