Sony TC-KB920S - Mechanism Component Disassembly; Base Block and Head Assembly

– 7 –
FITTING BASE BLOCK
HEAD
1 three screws
(PTPWH2
× 23)
Note: When installing,
pull the FR belt
and put around the
claws as shown below.
Note: When installing, pull the capstan belt
and put around the claws as shown below.
2 fitting base block
1 screw
(B2
× 4)
4 five screws
(B2
× 4)
5 record/
playback
head
6 head blacket
7 three RPH spring
s
2 erase
head
3 washer