Need help?Do you have a question about the Sony TC-KE500S and is the answer not in the manual?
General| Type | 3-head, single compact cassette deck |
|---|---|
| Track System | 4-track, 2-channel stereo |
| Tape Speed | 4.8 cm/s |
| Tape Type | type I, CrO2, Metal |
| Frequency Response | 20Hz to 19kHz (Metal tape) |
| Total Harmonic Distortion | 0.8% |
| Output | 0.5V (line) |
| Inputs | Line In |
| Dimensions | 430 x 125 x 310mm |
| Outputs | Line Out |
| Power Supply | AC 220-230V, 50/60Hz |
| Heads | 1 x record, 1 x playback, 1 x erase |
Measured at peak level, weighted, with Dolby NR off for different tape types.
Frequency range for Type I, II, and IV tapes with Dolby NR off, ±3 dB and ±6 dB.
Detailed procedure for removing the front panel assembly.
Instructions for accessing and removing the tape transport mechanism deck.
Procedures for calibrating electrical performance parameters like bias and levels.
Procedure for adjusting the record equalization for Type IV tape.
Procedure for setting the record bias levels for optimal recording.
Detailed circuit schematics for the main audio and control sections.
Comprehensive list of electrical components, including part numbers and specifications.
To Next Page
