EasyManua.ls Logo

Sony TC-WE305 - Adjustments; Mechanical Adjustments; Electrical Adjustments

Sony TC-WE305
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Basic Operations
Basic Operations
3-856-686-31(1)
7
EN
PAUSE P
DUBBING SPEED
REC rTAPE TYPE·
P
· ·
0)
PAUSE
P
0)
PAUSE
r
REC
ONOFF
DOLBY NR
DUBBING SPEED
DUBBING SPEED RECORD
REC LEVEL
TAPE COUNTER
RESET
PEAK LEVEL METER
POWER
I II / IV
Ø HIGH
HIGH
ø NORM
DECK A
IIIIV
0
1
2
3
4
5
6
7
8
9
10
DECK BTAPE TYPE
NORMAL
To
Press
Stop recording
PAUSE P. Press the button again to
resume recording.
after stopping recording
Pause
Take out the cassette
To record with the Dolby NR system
Set DOLBY NR to ON before you start recording.
Dubbing a Tape
You can copy a tape in deck A to a tape in deck B at normal or high speed.
1 Insert the recorded cassette into deck A and a blank cassette into deck
B.
Make sure the record-protect tabs on the cassette in deck B have not
been removed.
2 Set TAPE TYPE on both decks.
3 Press DUBBING SPEED to set to HIGH or NORMAL.
4 Press REC r on deck B and · on deck A.
To stop dubbing
Press on both decks.
Note
If a TV set is placed near the tape deck, noise may occur during high-speed dubbing.
In that case, turn the television set off or move it away from the tape deck.
Dubbing only specific portions
You can do this only during the normal-speed dubbing.
1 Press PAUSE P on deck B at the portion you want to skip.
Deck B changes to recording pause.
2 Locate the point you want to resume recording on deck A, then stop the
tape.
3 Press · on deck A.
Press PAUSE P on deck B to resume dubbing.
z What is the Dolby NR
system?
The Dolby NR (noise
reduction) system eliminates
tape hiss noise by boosting
low-level signals in the high-
frequency range during
recording, then lowering them
during playback.
z The MPX filter automatically
works during recording
z During high-speed dubbing
Only is operative.
z You don‘t have to adjust the
recording level or set Dolby
NR during dubbing
Dubbing is automatically
performed with the same
recording level and Dolby NR
setting as the original in deck
A. If, however, you want to
monitor the sound during
normal-speed dubbing, set
DOLBY NR to match the tape
in deck A (see page 5).
DOLBY NR
P
·
0)
PAUSE
0)
r
REC
ONOFF
DOLBY NR
DUBBING SPEED
DUBBING SPEED RECORD
REC LEVEL
PEAK LEVEL METER
I II / IV
Ø HIGH
HIGH
ø NORM
DECK A
IIIIV
0
1
2
3
4
5
6
7
8
9
10
DECK BTAPE TYPE
NORMAL

Other manuals for Sony TC-WE305

Related product manuals