3-856-686-31(1)
8
EN
Additional Information
Cleaning
p§
P
p§
· ·
0)
PAUSE
P
p§0)
PAUSE
r
REC
ONOFF
DOLBY NR
DUBBING SPEED
DUBBING SPEED RECORD
REC LEVEL
TAPE COUNTER
RESET
PEAK LEVEL METER
POWER
I II / IV
Ø HIGH
HIGH
ø NORM
DECK A
IIIIV
0
1
2
3
4
5
6
7
8
9
10
DECK BTAPE TYPE
NORMAL
Inside the cassette holder of deck B
CapstanErasing head
Recording/
playback head
Pinch roller
Cleaning the heads and tape path
Clean the heads and tape path of the tape deck after
every 10 hours of operation to guard against:
• low-quality sound
• a decrease in sound level
• excessive wow or flutter
• sound dropout
• incomplete erasure
• impairment of recording function
To ensure better recording, we recommend that you
clean the heads and tape path before every recording.
1 Press p§ to open the cassette holder. Grasp the
front cover on both sides and gently lift to remove
it.
2 With the tape deck turned off, wipe the heads, the
pinch rollers and the capstans with a cotton swab
slightly moistened with alcohol or a commercially
available cleaning fluid for tape decks.
3 Replace the front cover.
Demagnetizing the heads
After 20 to 30 hours of use, or when you notice a
hissing sound or loss of high frequencies, demagnetize
the heads with a commercially available demagnetizer
for tape decks. Please refer to the instructions of the
demagnetizer.
To Next Page
Loading...
