Need help?Do you have a question about the Sony TC-WE505 and is the answer not in the manual?
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Tape Speed | 4.8 cm/s |
| Frequency Response (Metal Tape) | 20 Hz - 20 kHz |
| Total Harmonic Distortion | 0.8% |
| Power Supply | AC 120V, 60Hz |
| Tape Types | Normal, Chrome, Metal |
| Type | Double Cassette Deck |
| Motor | DC Motor |
| Frequency Response (Chrome Tape) | 20 Hz - 20 kHz |
| Wow and Flutter | 0.07% WRMS |
| Input | Line In |
| Output | 0.5V (line) |
| Inputs | 1 x line |
| Outputs | 1 x RCA |
| Dimensions | 430 x 120 x 300mm |
Details harmonic distortion levels for different tape types and recording conditions.
Specifies frequency response across various tape types with Dolby NR off.
Outlines AC leakage testing methods and limits for exposed metal parts.
Step-by-step guide for removing the front panel assembly.
Instructions for disassembling the tape mechanism deck.
Procedures for mechanical adjustments like torque, bias, and head alignment.
Procedures for electrical adjustments including playback level, speed, and bias.
High-level overview of the system's signal flow and major components.
Layouts of the printed circuit boards for different sections.
Detailed circuit diagrams for various sections of the unit.
Visual breakdown of the chassis and its components.
Visual breakdown of the front panel and its parts.
Visual breakdown of the tape mechanism and its parts.
Lists components for the audio boards of both decks.
Lists components for Dolby-S, Headphone, Panel, Power, Transformer, and Vol boards.
Lists resistors, capacitors, diodes, transistors, ICs, and jacks.
Lists screws, cables, manuals, and other accessories.
Details specific corrections for pages 42 and 52 of the manual.
Details specific corrections for pages 41, 63, and 76 of the manual.
To Next Page
