Sony TC-WR465 - Playing a Tape

Basic Operations
Playing a Tape
¢ See page 7 for hookup
information. 1
¢ You can use either deck for
playback.
Turn on the amplifier and select the tape deck position.
2 Press POWER, and then press &
and insert a cassette.
With the side you want to
play facing you
3 Set DIRECTION.
To play back Set to
One side only cet
Both sides continuously* C=
Both decks in succession* RELAY
* The deck automatically stops after playing back five times.
Press [.
The deck starts playing. Adjust the volume on the amplifier.
¢ To locate the beginning of
a tape and start playback
automatically (Auto Play) To Press
Press 4 while holding down
[>. For the reverse side, press Stop playing Ee a
p> while holding down <1. Start playback from the reverse side <<
1 To play a tape recorded Pause (deck B only) PAUSE @f. Press the button again to
with
the
Dolby
NR
system
resume
play.
Set DOLBY NR to the same Fast-forward or rewind PP or 44 when the deck is stopped
position that the tape was A et 2 555 a
recorded
in—B
or
C.
Take
out
the
cassette
S
after
stopping
playing,
Y You can connect the
headphones to PHONES