Sony TC-WR535 - Section 2 Disassembly; Front Panel, Mechanism Deck, Head Disassembly

SECTION 2
DISASSEMBLY
2-3. CAPSTAN MOTOR, REEL MOTOR
Note : Follow the disassembly procedure in the numerical order given.
@ + PTPWH2 x 23
L ;
Arg
CASE
Unscrew the four case attachment screws M3 X 8 and
remove the case.
2-1.
FRONT
PANEL
\
@
Fitting
base
FRONTPANEL @-©
VOLTAGE SELEcToR Hi-
When installing, pull the FR a
capstan
belt
and
put
and
put
around
claws.
When installing, pull )
around claws.
VOLTAGE
SELECTOR
@ Remove the flat cable.
© Remove the front Panel.
@ claw @ Connectors
@ Capstan motor M1 (DECK A)
M3 (DECK B)
Ground plate
@ BvrTs x 8
@ Remove the flat cable.
2-2
MECHANISM
DECK
©
MD(A)board
(DECK
A)
@ +B2.6 X 3
MD(C)board (DECK B)
@ Press the EJECT button.
@ Reel motor M2 (DECK A)
M4 (DECK B)
Remove the cassette holder
© +P26x28
2-4. HEAD, PINCH ROLLER
@ Cassette lid
© BVTP26 x8
O Claw
@ Head base assy
HP101(DECK A)
HRPE101(DECK B)
@ Mechanism deck
@ BVTP2.6 x 8
© Lever (pinch lever REV) assy @ Lever (pinch lever FWD) assy
Sb, = ee ee