3
Model Name
Item
KV-25FX20A
KV-29FX20A
KV-25FX20B
KV-29FX20B
KV-25FX20D
KV-29FX20D
KV-25FX20E
KV-29FX20E
KV-25FX20K
KV-29FX20K
KV-25FX20R
KV-29FX20R
KV-29FX20U
Pal Comb OFF OFF OFF OFF OFF OFF OFF
PIP OFF OFF OFF OFF OFF OFF OFF
RGB Priority OFF ON ON ON OFF OFF OFF
Woofer Box ON ON ON ON ON ON ON
Scart 1 ON ON ON ON ON ON ON
Scart 2 ON ON ON ON ON ON ON
Front in (3) ON ON ON ON ON ON ON
Scart 4 OFF OFF OFF OFF OFF OFF OFF
Projector OFF OFF OFF OFF OFF OFF OFF
AKB in 16:9 mode ON ON ON ON ON ON ON
Norm B/G ON ON ON ON ON ON OFF
Norm I OFF ON OFF OFF OFF OFF ON
Norm D/K OFF ON OFF ON ON ON OFF
Norm AUS OFF OFF OFF OFF OFF OFF OFF
Norm L OFF ON OFF OFF OFF OFF OFF
Norm SAT OFF OFF OFF OFF OFF OFF OFF
Norm M OFF OFF OFF OFF OFF OFF OFF
Teletext ON ON ON ON ON ON ON
Nicam Stereo OFF ON OFF ON ON OFF ON
Language Preset Italian French German Spanish OIRT OIRT English
[RM-887]
Remote control system Infrared control
Power requirements 3V dc
2 batteries IEC designation
R6 (size AA)
Dimensions Approx 44x209x23mm (w/h/d)
Weight Approx 89g (Not including battery)
Design and specifications are subject to change without notice.
WARNING (KV-29FX20U only)
The flexible mains lead is supplied connected to a B.S. 1363 fused plug
having a fuse of 5 AMP capacity. Should the fuse need to be replaced,
use a 5 AMP FUSE approved by ASTA to BS 1362, ie one that carries the
mark.
IF THE PLUG SUPPLIED WITH THIS APPLIANCE IS NOT SUITABLE
FOR THE OUTLET SOCKETS IN YOUR HOME, IT SHOULD BE CUT
OFF AND AN APPROPRIATE PLUG FITTED. THE PLUG SEVERED
FROM THE MAINS LEAD MUST BE DESTROYED AS A PLUG WITH
BARED WIRES IS DANGEROUS IF ENGAGED IN A LIVE OUTLET
SOCKET.
When an alternative type of plug is used it should be fitted with a 5 AMP
FUSE, otherwise the circuit should be protected by a 5 AMP FUSE at the
distribution board.
ASA
T
How to replace the fuse.
Open the fuse compartment with
a screwdriver blade and replace
the fuse.
FUSE
To Next Page
Loading...
