To Next PageTo Next Page
Need help?Do you have a question about the Sony TRINITRON KV-2565MT and is the answer not in the manual?
Details television systems and frequency channel coverage.
Read and retain this manual for future reference.
Guides connecting VHF/UHF antennas via coaxial cable.
Guides connecting VTRs and other devices via S-Video or standard video inputs.
Automatically presets up to 30 channels in numerical sequence.
Manually presets channels for program number or weak signal reception.
Skips unused or undesired program positions during channel selection.
Covers powering on/off, channel selection, and volume adjustment.
Guides on selecting and switching video input sources.
Selects picture modes like Dynamic, Middle, or Soft for optimal viewing.
Adjusts contrast, color, brightness, hue, balance, treble, and bass.
Sets the TV system for clear sound and normal color reception.
Sets color system to AUTO or PAL for correct color reproduction.
Adjusts picture sharpness by turning the control clockwise or counterclockwise.
Turns the on-screen display on or off using the DISPLAY button.
Mutes the TV's audio output using the MUTE button.
Sets the TV to turn off automatically after a set time (30, 60, or 90 minutes).
Enhances audio with theatrical or live concert effects.
Details the steps for removing the television's rear cover.
Guides on placing the TV in a service position for internal access.
Procedures and notes for safely removing the picture tube anode cap.
Precautions for handling the anode cap to prevent damage or injury.
Adjusts beam landing using purity control and deflection yoke positioning.
Lists essential test equipment for set-up adjustments.
Adjusts static convergence for red, green, and blue dots using H.STAT and V.STAT.
Steps to correct blue dot convergence with red and green dots.
Corrects horizontal miss convergence using the BMC magnet.
Corrects vertical miss convergence using the BMC magnet.
Adjusts dynamic convergence by moving the deflection yoke.
Corrects screen-corner misconvergence using permalloy assemblies.
Adjusts G2 voltage and notes color visibility during adjustment.
Adjusts white balance using BKG and DRIVE controls with a color bar signal.
Adjusts RF AGC for optimal signal reception and noise reduction.
Positions the channel display correctly on the screen.
Adjusts APC for suitable color intensity using PAL signals.
Adjusts the 3.58 MHz reference oscillator for NTSC signals.
Adjusts for anti-PAL signal conditions and minimizes line crawling.
Adjusts pincushion, H/V size, linearity, and centering.
Adjusts discriminant circuit for SECAM color-bar signal.
Adjusts bell filter for SECAM color-bar signal.
General