Sony TRINITRON KV-2565MT - Horizontal Miss Convergence (HMC); Vertical Miss Convergence (VMC); Dynamic Convergence Adjustment; Screen-Corner Convergence

KV-2965MT |
RM-827S
1. HMC (Horizontal Miss Convergence) correction and
2. VMC (Vertical Miss Convergence) correction and
motion of the Electron Beam with the BMC
motion of the Electron Beem with the BMC
Magnet. Magnet.
HMC correction (A) HMC correction (B) VMC correction (A) | VMC correction (B)
c<D C=D Cc>D oA A
(2) Dynamic Convergence Adjustment
Preparations :
C a Cc ‘ C nae Cc
G
b8 res :
a B B B
@ Before starting perform Horizontal and Vertical
3. Move the deflection yoke for best convergence
static convergence Adjustmet.
as shown below.
1. Slightly loosen deflection yoke screw. 4. Tighten the deflection yoke screw.
2. Remove deflection yoke spacers. 5. Install the deflection yoke spacers.
(3) Screen -corner Convergence
Afhx a Permalloy ass'y
corresponding to the
Permalloy assembly