To Next PageTo Next Page
Need help?Do you have a question about the Sony TRINITRON KV-M1451D and is the answer not in the manual?
Details safety precautions regarding the mains lead and plug.
Details the function and signal level for each pin of the 21-pin connector.
Warns about short-circuiting the CRT anode after removing the cap.
Emphasizes using an isolating transformer for service work.
Highlights critical safety components that require specific replacement.
Describes the process for automatically tuning and storing TV channels.
Steps for adjusting picture settings like color, brightness, and contrast.
Detailed steps for manually tuning and storing TV channels.
Solutions for common problems affecting picture and sound quality.
Troubleshooting steps if the remote control is unresponsive.
Advice on not opening the casing and seeking qualified service.
Steps to remove the rear cover of the TV set.
Instructions for placing the TV in a service-friendly position.
Detailed steps and precautions for safely removing the anode cap.
Procedure for adjusting beam landing using a degausser and purity controls.
Adjusting static convergence using V.STAT magnet and BMC magnet.
Procedure for dynamic convergence adjustments by moving the deflection yoke.
Adjusting convergence in the screen corners using Permalloy assembly.
Instructions on how to access the service mode using the remote commander.
Adjustments related to the deflection system for picture geometry.
Explains how the chassis identifies and reports errors via LED flashes.
General