Sony UP-D895MD - Specifications; Medical Specifications

Specifications
12
Specifications
Printer
Thermal head Thin-film thermal head, 1280 dots
Gradation 256-level gradation (8-bit)
Memory capacity
4096
K
1280
K
8 (bit)
Picture size 320
K
100 mm (max.)
Printing speed About 5.1 sec./image (1280
K
1280
dots)
Picture elements
4096
K
1280 dots (max.)
Dot density H: 100 mm/1280 dots = 0.078
V: 100 mm/1280 dots = 0.078
Square dots
Power supply 100 to 120V AC, 50/60Hz, 1.5A
220 to 240V AC, 50/60Hz, 0.8A
Temperatures Operating
5°C~35°C (41°F ~ 176°F)
Storage/Transport
–20°C~60°C (-4°F~140°F)
Humidity Operating
20% ~ 80%
Storage/ Transport
20% ~ 90%
Dimensions 154
K
105
K
260 mm (w
K
h
K
d)
6.1
K
4.1
K
10.2 in. (w
K
h
K
d)
Weight 3.4 kg (1.54 lb.) (printer only)
Accessories provided
Thermal head cleaning sheet
K
1
Printer driver/Instructions for Use
K
1
Ferrite core
K
2
Before Using this Printer
K
1
Service Contact List
K
Software License
K
1
Media label
K
1
USB Interface
Data transmission
Universal Serial Bus Specification Rev.
1.0 Standard
USB Interface Connector Pin Assignment
The design and these specifications are subject to
change without prior notification.
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of water:
Ordinary
Degree of safety in the presence of flammable
anesthetics or oxygen:
Not suitable for use in the presence
of flammable anesthetics or oxygen
Mode of operation:Continuous
H
V
Pin I/O Signal Function
VCC Cable power, Max. current
100mA
I/O –Data Data
I/O +Data Data, pull up to +3.3V through
a 1.5k: resistance
Ground Cable ground