10. WARNING STICKER
Amutec’s rides are provided with comprehensive warning stickers and instructions which are
applied to the ride at the time of sale. Operators should ensure:-
1. These stickers remain in place
2. Stickers remain clearly readable and undamaged
3. Stickers are translated into any commonly used local language and then applied to the
machine
11. INSPECTIONS
Every time the ride is emptied check:-
1. The mains cable and mains plug are in good condition ensuring the fuse is of the correct
rating
2. All warning stickers or instruction stickers are in a clean undamaged condition
3. That no sharp edges have been caused by broken lenses or damaged fibreglass
4. Run the machine and check operation is correct
Every three months check:-
1. No items on the machine have come loose
2. There is no build up of rubbish in the base of the machine
Chuck ‘E’ Cheese Black & White Photo Ride Page 7
To Next Page
Loading...
