Need help?Do you have a question about the Sony UP860 and is the answer not in the manual?
General| Connectivity | USB |
|---|---|
| Technology | Dye Sublimation |
| Gradation | 8-bit |
| Interface | USB 2.0 |
| Maximum Print Width | 64" (1, 625 mm) |
| Operating Systems | Windows |
| Power Requirements | AC 100-240V, 50/60Hz |
Checks upon arrival and procedures for setting up the Photo Ride, including printer installation.
Guidance on noting the machine's serial number before placement.
Step-by-step guide for loading paper rolls into the printer.
Steps to initiate a print and troubleshoot common image quality issues.
Environmental and placement guidelines for optimal ride performance and longevity.
Detailed instructions for placing the ride on level ground and securing it.
Procedures for connecting a monitor and adjusting camera/lens for optimal image output.
Guide to adjusting printer contrast and brightness using the video monitor.
Instructions on initiating print jobs, checking paper status, and selecting print options.
Adjusting light metering via the ALC potentiometer for correct exposure.
Re-adjusting video signal level using the level potentiometer for image quality.
Step-by-step guide for operating the ride with two coins.
Ensuring warning stickers are in place, readable, translated, and undamaged.
Checks to be performed every time the ride is emptied and every three months.
Detailed checks for moving parts, fixings, bearings, and structure integrity.
Checks for mains input, connections, wiring, fuses, and earthing by a qualified electrician.
Inspection of fibreglass, fittings, warning signs, and electrical safety at 12V.
Adjusting volume, ride time, and coin settings using timers and programmers.
Instructions for day-to-day cleaning of the ride's fiberglass components.
Methods for removing scratches, refurbishing, and filling holes in fiberglass.
Checks for mechanical parts condition and electrical part integrity.
Troubleshooting steps for common issues like no lights, coin acceptance, or ride motion.
Diagnosing and resolving print quality problems like specks, missing portions, or incorrect output.
Steps to troubleshoot paper vending, auto cutter operation, and permanent cutter running.
Procedure for adjusting the printer to achieve correct paper cutting.
Instructions on cleaning the printer exterior without damaging the cabinet.
Procedure for cleaning the printer's thermal head to resolve print quality issues.
Recommendations for storing unused or printed paper to maintain quality.
Information required when ordering spare parts, including serial number and part number.
Dimensions, motor, gearbox, lighting, and fuse rating for the Chuck 'E' Cheese Photo Ride.
Guidance on adjusting the S1 acceptor for diameter and thickness.
Details on adjusting coin settings and microswitch for the S1 acceptor.
Table of lock out coil voltages, currents, power, and colour codes.
Description of features including jam resistance, coin checks, and lockout coil.
Colour codes for mains, 12V circuits, coin mech, lamps, and speakers.
Colour codes for camera and auto cutter loom connections for power and signals.
Diagram illustrating the power supply unit components and connections.
To Next Page
