Need help?Do you have a question about the Sony UP-20 and is the answer not in the manual?
Printing Specifications| printing method | dye sublimation printing |
|---|---|
| resolution | 403 dpi |
| gradations | 256 gradations for Yellow, Magenta, Cyan |
Print Area| NTSC S size full print area | 95.8 x 72.4 mm |
|---|---|
| NTSC L size full print area | 126.9 x 91.5 mm |
| PAL S size full print area | 95.8 x 72.7 mm |
| PAL L size full print area | 126.9 x 91.9 mm |
Paper Specifications| paper size A6 S size | 100 x 90 mm |
|---|---|
| paper size A6 L size | 144 x 100 mm |
| paper tray capacity L size tray | Max. 50 sheets |
Power Specifications| power consumption 100 to 120 V | 1.8 A |
|---|---|
| power consumption 220 to 240 V | 1.0 A |
| power requirements | AC 100 to 120 V, 50/60 Hz |
Weight and Dimensions| dimensions | 212 (W) x 125 (H) x 395 (D) mm |
|---|---|
| mass | Approx. 6.5 kg |
| dimensions (inches) | 8 [3]/8 x 5 x 15 [5]/8 inches |
Precautions for reducing risk of fire, electric shock, and earthing.
Crucial safety measures for operating in medical environments.
EMC precautions and guidance specific to medical environments.
Declaration regarding electromagnetic emissions and intended use environment.
Further details on immunity test standards and guidance.
Recommended distances for RF equipment to prevent interference.
General and medical use power connection guidelines.
Video, sync, and signal connectors.
Diagram and instructions for connecting video sources.
How to connect a video monitor to the printer.
Connecting remote controls or computers for printer operation.
Choosing the correct video input signal for printing.
Basic steps for creating a standard, full-size printout.
How to set the number of copies for identical printouts.
Solutions for when the printer fails to produce prints.
Causes and solutions for black lines appearing on prints.
Tips for improving color and picture quality.
Registering and selecting printer settings as user sets.
Specifics for making printouts with four reduced images.
Fixing blurred images by changing memory mode.
General safety, installation, and condensation guidelines.
Safety specifications for medical environments.
List of error messages, their causes, and remedies.
List of warning messages, their causes, and remedies.
Initial checks for damage or persistent problems.
Steps to remove jammed paper and prevent future jams.
Solutions for when the printer fails to produce prints.
Resolving black lines that may appear on printed images.
Fixing black frames that may appear on printed images.
Solutions for when printed images are cut off.
Methods to improve printout clarity and sharpness.
Addressing issues with pale or faded printout colors.
Resolving problems with loading the ink ribbon.
Fixing blank paper output and RIBBON END messages.
To Next Page
