Need help?Do you have a question about the Sony UP-897MD and is the answer not in the manual?
General| Resolution | 325 dpi |
|---|---|
| Power Requirements | AC 100 V to 240 V, 50/60 Hz |
| Operating Temperature | 5°C to 35°C (41°F to 95°F) |
| Operating Humidity | 20% to 80% (non-condensing) |
| Paper Size | 110 mm width |
| Interface | High Speed USB |
| Gradation | 256 levels |
| Print Size | 89 mm x 127 mm (3.5" x 5") |
| Safety Compliance | UL |
| Print Technology | Direct Thermal Printing |
| Print Speed | Approx. 2.0 seconds per page |
Detailed steps for replacing major internal components like thermal head, motors, and belts.
Calibrating brightness/contrast and checking button conductivity.
Detailed steps for adjusting display brightness, contrast, and head voltage.
Resetting print count history and updating the unit's firmware.
Flowcharts for diagnosing unsatisfactory print results and density problems.
Flowcharts for diagnosing paper sensor and thermal head movement issues.
Detailed circuit diagrams for the MA-132 board (multiple pages).
Procedures to ensure the unit is safe for customer use after repairs.
Detailed method for measuring AC leakage current to prevent electric shock.
To Next Page
