3. Camera Operations: Operations on the Home Screen of the Sub Display
47
Item Description
Viewfinder
When RM/RCP Paint Control is set to Off:
Selects the LUT to apply to the viewfinder/monitor screen output
image.
The settings change as follows depending on the Project category >
Input Color Space setting in the menu.
S-Gamut3.Cine/SLog3 or S-Gamut3/SLog3: Log/s709/R709(800%)/
Look
ACEScct: Log/s709/R709(800%)/Look
When RM/RCP Paint Control is set to On:
Selects the type of viewfinder/monitor screen output image.
The settings change as follows depending on the Project category >
Input Color Space setting in the menu.
S-Gamut3.Cine/SLog3 or S-Gamut3/SLog3: Log/R709(800%)
HLG(Natural): HLG(Natural)
HLG(Live): HLG(Live)
Rec.2020/User Gamma: User Gamma/R709-Like
Rec.709/User Gamma: User Gamma
ProRes(Recording)
When RM/RCP Paint Control is set to Off: Log/Look
Selects the LUT to apply to the ProRes recording image.
When RM/RCP Paint Control is set to On: Log/HLG(Natural)/HLG(Live)/
User Gamma
The ProRes recording image setting is display only, because it is
determined by the Project category > Input Color Space setting in
the menu.
[Note]
Displayed and configurable when Project > Basic Setting > Recording Format
(page 72) is set to ProRes format in the full menu.
Edit Look
Sets a LUT to apply as a Look.
s709 / R709(800%) / S-Gamut3.Cine/SLog3 / S-Gamut3/SLog3 / User
3D LUT
WB (White Balance)
Sets the color temperature/color tone of the white balance.
Default selection options
3200K+00/4300K+00/5500K+00
You can press the Step Edit button (ITEM key 4) to change the white
balance preset value and Tint value.
Auto White Bal.: Execute auto white balance.
1) The options are 1/60 and subsequent values when the project frame rate is 59.94, 1/50 and subsequent values
when 50.0, 1/30 and subsequent values when 29.97, and 1/25 and subsequent values when 25.0.
To Next Page
Loading...
