Sony VENICE 2 - Page 71

3. Camera Operations: Shooting Menu
71
Shooting > LUT Select
Makes settings related to the LUT to apply to the output image.
[Note]
The value of each menu item (excluding SDR Gain) varies depending on the Technical > Special Configuration > RM/
RCP Paint Control (page 91) setting in the full menu.
Menu item Setting Description
SDR Gain
–15dB to 0dB (–12dB)
(1dB increments)
Sets the SDR output gain when RM/RCP Paint
Control is set to On.
You can use this to change the gain of the
Monitor or viewfinder output that is set to
R709(800%) or R709-Like.
[Note]
Configurable when Technical > Special Configuration
> RM/RCP Paint Control (page 91) is set to On in
the full menu.