Connecting to a TV or VCR Directly with A/V Connecting Cable i
If your TV or VCR is a stereo type use the supplied A/V connecting cable. If your TV or VCR is a monaural
type use a VMC-910MS/920MS A/V Connecting Cable (not supplied). (1) Connect the camcorder and your TV
or VCR with the A/V connecting cable. (2) Set IN/OUT on the camcorder to OUT. (3) Align the right side of the
AC power adaptor with awhite line on the camcorder and while pressing the AC power adaptor, slide it in the
direction of the arrow. (4) Set the VTR (DC OUT)/CHARGE selector of the AC power adaptor to VTR (DC
OUT).
: Signalflow
24
(1) Connect the camcorder and the TV by using the supplied RFU adaptor. (2) Set the channel selector on the
RFU adaptor to 3CH or 4CH whichever is not active in your area. (3) Set IN/OUT of the camcorder to OUT. (4)
Align the right side of the AC power adaptor with a white line on the camcorder and while pressing it, slide it in
the direction of the arrow. (5) Set the VTR (DC OUT)/CHARGE selector of the AC power adaptor to VTR (DC
OUT).
VIDEO
RFU DC OUT
AUDIO
: Signal flow
4CH
The playback sound is monaural when you use the RFU adaptor.
When you view a TV program
Set the VTR (DC OUT)/CHARGE selector of the AC power adaptor to OFF or set the POWER switch of the
camcorder to OFF.
To Next Page
Loading...
Need help?
General
