112
nN
Using Peripheral Devices >
Connecting an Optical Disc Drive
Connecting an Optical Disc Drive
If your computer is not equipped with a built-in optical disc drive, connect an external optical disc drive (not supplied) for disc
operations.
Connecting an Optical Disc Drive
!
Be sure to connect an external optical disc drive to your computer before launching any preinstalled disc operation program.
Be sure to connect an external optical disc drive to an AC power source before using the drive. Your computer only supports optical disc drives that
run on the power directly supplied from an AC power source.
To connect an optical disc drive
1 Connect your external optical disc drive to an AC outlet (1).
2 Choose the USB port (2) you prefer to use.
3 Plug one end of a USB cable (3) into the USB port, and the other end to the optical disc drive.
To Next Page
Loading...
