How to fix Sony VPL-CX86 Projector when the power is not turned on?
There are several reasons why your Sony Projector might not be turning on: * If you've recently turned the power off and on quickly, wait about 60 seconds before trying again. * Ensure that the lamp cover is securely closed. * Also, check that the air filter cover is properly attached.
What to do if both LAMP/COVER and TEMP/FAN indicators light up on Sony Projector?
If both the LAMP/COVER and TEMP/FAN indicators light up on your Sony Projector, it indicates a breakdown in the electrical system. In this case, you should consult with qualified Sony personnel for assistance.
Explains Air Shot feature for wireless data transmission via LAN.
Covers computer-free options, easy setup, auto-setup, zoom/focus, Side Shot, Off & Go.
Covers versatile installation, direct power control, and network expandability.
Explains the projector's security lock and panel key lock functions.
Details the function of each button on the projector's control panel.
Explains the meaning of the ON/STANDBY indicator lights and flashes.
Describes the function of various keys for menu navigation and picture adjustment.
Explains the basic keys like I/O, Muting, Input, Tilt/Keystone, Memory Stick, Freeze, Air Shot.
Guides on connecting the projector to a computer via audio, USB, and D-sub cables.
Describes pressing the I/O key to start the Intelligent Auto-setup process.
Step-by-step guide to safely turn off the projector.
Details on how to activate and set a password for the security lock feature.
Steps to enter and confirm a new password for the security lock.
Step-by-step instructions for safely replacing the projector lamp.
Solutions for issues like the projector not turning on or indicators lighting up.
Diagnoses and remedies for situations where no sound is produced by the projector.
Troubleshooting steps for when the remote commander is unresponsive or controls are not working.
Explains causes for LAMP/COVER and TEMP/FAN indicator flashes or continuous light.
Interprets warning messages like high temperature or frequency out of range.
To Next Page
General