Why is the picture noisy on my Sony VPL-CX80?
Noise may appear on the background of your Sony Projector depending on the combination of the numbers of dot input from the connector and numbers of pixel on the LCD panel.
What to do if my Sony Projector has no picture?
If your Sony Projector displays no picture, ensure all cables are properly connected. Select the correct input source using the INPUT key. If using a computer, set the computer signal to output only to an external monitor. For notebooks or all-in-one LCD types, you might need to switch the computer's output to the projector via specific keys or settings; refer to your computer's operating instructions for details.
How to fix a Sony VPL-CX80 Projector when the power is not turned on?
If your Sony Projector isn't turning on, wait about 60 seconds before attempting to turn it on again if it was recently turned off and on. Ensure the lamp cover is securely closed and that the air filter cover is properly attached.
How to adjust the image size on my Sony VPL-CX80 Projector when it extends beyond the screen?
If the image on your Sony Projector extends beyond the screen, and you've pressed the APA key when there are black edges, display the full image and press the APA key again. You can also adjust the “Shift” settings on the INPUT SETTING menu.
What to do if powered tilt adjuster and lens protector do not close on Sony VPL-CX80?
If the powered tilt adjuster and the lens protector on your Sony Projector do not close, and the AC power cord was unplugged while the projector was on, reconnect the power cord to the AC outlet, turn the projector on, and then turn it off.
What to do if the powered tilt adjuster and lens protector on my Sony VPL-CX80 Projector won't close?
If the powered tilt adjuster and the lens protector on your Sony Projector do not close, it might be because the AC power cord was unplugged while the projector was on. Reconnect the power cord, turn the projector on, and then turn it off.
How to fix image extending beyond the screen on Sony VPL-CX80?
If the image from your Sony Projector extends beyond the screen, and you've noticed black edges around the image, press the APA key to display the full image. You can also adjust the “Shift” setting in the INPUT SETTING menu, as described on page 31.
What does 'Please check Input-A Signal Sel.' mean on Sony VPL-CX80 Projector?
If your Sony Projector displays the message “Please check Input-A Signal Sel.” even when inputting the correct signal from INPUT A, ensure that the “Input-A Signal Sel.” setting in the SET SETTING menu is correctly set to “Computer,” “Video GBR,” or “Component” according to the input signal, as described on page 33.
What to do if the remote commander for Sony VPL-CX80 Projector is not working?
If the remote commander for your Sony Projector isn't working, first replace the batteries, referring to page 15. Then, ensure the COMMAND ON/OFF switch is set to ON. Lastly, verify that the PJ/NETWORK selector switch is set to PJ.
Why is the picture from the INPUT A connector on my Sony VPL-CX80 Projector colored strangely?
If the picture from the INPUT A connector on your Sony Projector is colored strangely, the “Input-A Signal Sel.” setting on the SET SETTING menu may be incorrect. Select “Computer,” “Video GBR,” or “Component” according to the input signal.
To Next Page
General
