To Next Page
W
wbarrettSep 9, 2025
What does 'NO INPUT' mean on my Sony VPL-CX11?
- KKristina CurtisSep 9, 2025
This message on your Sony Projector indicates that there is no input signal. Check connections.
What does 'NO INPUT' mean on my Sony VPL-CX11?
This message on your Sony Projector indicates that there is no input signal. Check connections.
Why is the LAMP/COVER indicator flashing on my Sony Projector?
If the LAMP/COVER indicator is flashing on your Sony Projector, the lamp cover or the air filter cover might be detached. Attach the cover securely.
Why is the picture from INPUT A connector colored strange on my Sony VPL-CX11 Projector?
If the picture from the INPUT A connector is strangely colored on your Sony Projector, select RGB or COMPONENT for INPUT-A in the SET SETTING menu according to the input signal.
Why does the FAN/TEMP indicator light up on my Sony VPL-CX11?
If the FAN/TEMP indicator lights up on your Sony Projector, the internal temperature is unusually high. Check to see if anything is blocking the ventilation holes.
Why does 'High temp.! Lamp off in 1 min.' appear on my Sony VPL-CX11?
This message on your Sony Projector indicates that the internal temperature is too high. Turn off the power and check to see if anything is blocking the ventilation holes.
What does 'Please replace the lamp' mean on my Sony Projector?
This message on your Sony Projector means that you need to replace the lamp.
Why does my Sony VPL-CX11 output sound through one channel only?
If sound is coming through only one channel on your Sony Projector when input through the AUDIO connector, it may be because monaural sound is being input. Input stereo sound instead.
What does 'Not applicable!' mean on my Sony VPL-CX11?
This message on your Sony Projector indicates that you have pressed the wrong key. Press the appropriate key.
Why is there no sound from my Sony VPL-CX11 Projector?
If there is no sound from your Sony Projector, check that the proper cable connections have been made.
What does 'Please check INPUT-A setting' mean on my Sony Projector when inputting correct signal?
This message on your Sony Projector indicates that the INPUT-A setting in the SET SETTING menu is incorrect. Select RGB or COMPONENT for INPUT-A in the SET SETTING menu according to the input signal.
Key safety and operational advice to prevent damage or hazards.
Details buttons, keys, and indicators on the projector's control panel.
Explains functions of all remote control keys and components.
Guidance and measurements for physically installing the projector.
Instructions for connecting the projector to a computer.
Details connecting VCRs and RGB/component sources.
Step-by-step guide for safe projector lamp replacement.
Instructions for cleaning/replacing the air filter for optimal performance.
Explanation of on-screen warning messages and recommended actions.
Explanation of on-screen caution messages and how to resolve them.
General| Resolution | XGA (1024 x 768) |
|---|---|
| Contrast Ratio | 400:1 |
| Lamp Life | 2000 hours |
| Display Technology | 3LCD |
| Aspect Ratio | 4:3 |
| Projection Size | 30 to 300 inches |
| Lamp Type | UHP |
| Weight | 2.9 kg |
| Zoom | 1.3x |
| Input Ports | S-Video, Composite |
