To Next PageTo Next PageHow to fix color balance on Sony VPL-DX10?
If the color balance on your Sony Projector is incorrect, adjust the image quality settings in the Picture menu. Also, check the setting of “Input-A Signal Sel.” in the Setup menu and select the correct option (“Computer,” “Video GBR” or “Component”) according to the input signal. Finally, ensure that “Color System” in the Setup menu matches the color system being input.
Why is there no picture on my Sony VPL-DX10?
There could be several reasons why your Sony Projector is not displaying a picture. First, ensure that the power is turned on. Next, check all cable connections to make sure they are properly connected. Also, verify that the lens shutter is open and the correct input source is selected. Finally, confirm that the picture is not muted by pressing the PIC MUTING key. If you are using a computer, ensure the signal is set to output to an external monitor.
Why is the picture not clear on my Sony VPL-DX10?
If the picture on your Sony Projector is not clear, it may be out of focus. Adjust the focus to correct this. Another potential cause is condensation on the lens. If this is the case, leave the projector on for about two hours to allow the condensation to dissipate.
How to fix incorrect color balance on Sony VPL-DX10 Projector?
If the color balance on your Sony Projector is incorrect, the image quality setting may not be proper; adjust it in the Picture menu. Also, the setting of “Input-A Signal Sel.” in the Setup menu might be incorrect; select “Computer,” “Video GBR” or “Component” according to the input signal. Finally, ensure “Color System” in the Setup menu matches the color system being input.
Why is the picture too dark on my Sony VPL-DX10?
If the picture on your Sony Projector is too dark, it could be due to improperly adjusted contrast or brightness settings. Adjust the Contrast or Brightness in the Picture menu. It's also possible that the lamp has burnt out or is dim. Check the Lamp Timer in the Information menu.
How to fix a Sony VPL-DX10 that won't turn on?
If your Sony Projector is not turning on, make sure the AC power cable is firmly connected. Also, check that the lamp or lamp cover is securely closed.
General| Resolution | 1024 x 768 (XGA) |
|---|---|
| Contrast Ratio | 2000:1 |
| Display Technology | 3 LCD |
| Projection Size | 30 to 300 inches |
| Aspect Ratio | 4:3 |
| Lamp Type | UHP |
| Input Connectors | S-Video, Composite Video |
| Power Consumption | 220W |
