23
The Function Menu
Adjustments and Settings Using a Menu
The Function Menu
The Function menu is used for setting various functions of the projector.
*1: APA functions when a computer signal is input via the RGB input terminal (INPUT A).
Items Item descriptions
Presentation Timer Timer Set/Start: Sets the projecting time with the timer. Press the
ENTER key to start counting.
Size Fixed Small/Fixed Large/Auto: Selects the character size of the
timer. When set to “Auto,” the timer with the larger characters will be
displayed for three seconds once every minute (approx.). It informs the
passing of time to the presenter.
Position Bottom Right/Bottom Left/Top Right: Selects the position of the
timer.
Count UP/Down Up/Down: Selects counting up or counting down of the set time.
Volume The higher the value, the louder an audio volume and the lower the
value, the lower the audio volume.
Smart APA On/Off: When set to “On,” APA functions automatically when a
signal is input.
*1
CC Display Off: Closed caption does not appear.
CC1/CC2/CC3/CC4/Text1/Text2/Text3/Text4: Selects the closed
caption service (captions or text).
Lamp Timer Reset When replacing the lamp, resets the lamp timer (page 34).
Start Up Image On/Off: When set to “On,” the Start Up Image is displayed on the
screen when the projector is powered on.
Note
To Next Page
