What does it mean when the TEMP/FAN light is on my Sony VPL-HS50 Projector?
If the TEMP/FAN light is illuminated on your Sony Projector, check to see if anything is blocking the ventilation holes or if the projector is being used at high altitudes.
How to stop the picture from flickering on my Sony VPL-HS50 Projector?
If the picture on your Sony Projector is flickering, adjust the “Dot Phase” setting for “Adjust Signal” in the signal menu.
How do I enable the on-screen display on my Sony VPL-HS50?
If the on-screen display is not appearing on your Sony Projector, set the “Status” option in the Setup menu to “On.”
What does 'No signal is input in the selected input' mean on my Sony Projector?
If your Sony Projector displays 'No signal is input in the selected input', check the connections to ensure they are properly made.
What does 'Please check Input-A Signal Sel.' mean on my Sony VPL-HS50 Projector?
If your Sony Projector displays 'Please check Input-A Signal Sel.', set “Input-A Signal Sel.” in the Setup menu to “Computer” when an RGB signal is input from the computer.
What does 'High temp.! Probably use in high altitude' mean on my Sony Projector?
If your Sony Projector displays 'High temp.! Probably use in high altitude,' and you are using the projector at an altitude of 1,500 m or higher, select “Yes” to set to “High Altitude Mode.” Also, check to see if nothing is blocking the ventilation holes.
General| Display Technology | LCD |
|---|---|
| Resolution | 1280 x 720 (720p) |
| Contrast Ratio | 6000:1 |
| Lens Shift | Yes |
| Brightness | 1000 ANSI lumens |
| Lamp Life | 2000 hours |
| Inputs | HDMI, Component, Composite, S-Video |
| Projection Size | 40 to 300 inches |
| Throw Distance | 1.5 m to 10 m |
To Next Page
