To Next PageTo Next PageWhy is there no on-screen display on my Sony Projector?
If the Sony Projector’s on-screen display does not appear, set “Status” on the Setup menu to “On.” Also, check if the ON/STANDBY indicator should light up in green. If it blinks in green, the unit is starting up; wait until it stops blinking and remains lit in green.
How to adjust brightness in bright or dark areas on Sony VPL-VW1000ES?
If the Sony Projector displays bright or dark areas of the video that appear too bright or too dark, switch the RGB output level of the connected equipment or switch the HDMI Dynamic Range of the unit.
How to remove ghosts from Sony VPL-VW1000ES picture?
If the Sony Projector picture has ghosts, watch the 3D video images using the 3D glasses and set “2D-3D Display Sel.” to “3D”.
Why can't I adjust the lens shift on my Sony VPL-VW1000ES?
If the lens shift on your Sony Projector cannot be adjusted, ensure you are adjusting it within the range of movement.
How to stop my Sony VPL-VW1000ES from turning on with other devices?
General| HDCP | - |
|---|---|
| Noise level | - dB |
| 3D | Yes |
| Supported video modes | 1080i, 1080p, 2160p, 480i, 480p, 576i, 576p, 720p |
| Supported graphics resolutions | 3840 x 2160, 4096 x 2160 |
| Projection distance | - m |
| Projection technology | SXRD |
| Supported aspect ratios | 17:9 |
| Contrast ratio (dynamic) | 1000000:1 |
| Screen size compatibility | 60 - 300 \ |
| Projector native resolution | DCI 4K (4096x2160) |
| Focal length range | - mm |
| Vertical lens shift range | -80 - 80 % |
| Horizontal lens shift range | -30 - 30 % |
| Service life of light source | - h |
| DVI port | No |
| Composite video in | 0 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | Black |
| Market positioning | Home cinema |
| Power source | AC |
| Power consumption (standby) | - W |
Weight and Dimensions| Weight | - g |
|---|
Covers main warnings, FCC compliance, and regional notes.
Covers warnings in French, German, and other languages.
Covers warnings related to battery use and disposal.
Covers safety, heat, repacking, and 3D glasses safety.
Details front panel, rear connectors, and remote control layout.
Covers unpacking, power connection, and unit installation.
How to change the on-screen display language.
Guide to displaying images from connected equipment.
Watching 3D content, using and charging glasses.
Adjusting lens settings and picture position.
Selecting aspect ratios and picture quality modes.
Using ImageDirector3 for gamma correction.
How to operate and navigate menu windows.
Configuring image parameters and display settings.
Configuring unit, 3D, HDMI, and other functions.
Settings for physical installation and viewing unit status.
Capabilities of network connection.
How to connect and control via web browser.
Page switching, access limitation, and remote control via PC.
Configuring email reports for maintenance and status.
Diagnosing and resolving power, picture, and remote problems.
Interpreting indicator lights and on-screen messages.
Step-by-step guide for lamp replacement.
How to clean the unit and screen.
Technical details of the projector.
Supported input signals and their presets.
List of supported 3D signal formats.
Projection distance and lens shift ranges.
Size and mounting details.
