How to fix unclear color gradation on HDMI 1 or HDMI 2 of my Sony VPL-VW60 Operating Instructions (VPL-VW60) Projector?
If the color gradation of the dark or bright areas of the picture from the HDMI 1 or HDMI 2 connector on your Sony Projector is unclear, adjust the “Brightness” and “Contrast” in the Picture menu.
How to fix a strange color on my Sony VPL-VW60 Operating Instructions (VPL-VW60) from the INPUT A connector?
If the picture from the INPUT A connector on your Sony Projector is colored strangely, select “Computer,” “Component” or “Video GBR” for “Input-A Signal Sel.” on the Setup menu according to the input signal.
How to fix a strange color on my Sony VPL-VW60 Operating Instructions (VPL-VW60) Projector from the VIDEO INPUT or S VIDEO INPUT connector?
If the picture from the VIDEO INPUT or S VIDEO INPUT connector on your Sony Projector appears with strange colors, try adjusting the picture settings in the Picture menu. You can also set the “Color System” in the Setup menu to match the color system being input.
Why is my Sony Projector picture not clear?
If the picture on your Sony Projector is not clear, try adjusting the focus. Additionally, condensation may have accumulated on the lens; if so, leave the projector on for about two hours to allow the condensation to dissipate.
What to do if my Sony Projector picture is too dark?
If the picture on your Sony Projector is too dark, adjust the “Contrast” or “Brightness” in the Picture menu.
What to do if my Sony Projector shows no picture?
If your Sony Projector displays no picture, check the following: Ensure all connections are properly made. Select the correct input source using the INPUT button. If using a computer, set the computer signal to output from an external monitor, or to output only to an external monitor. Also, select “Computer,” “Component” or “Video GBR” for “Input-A Signal Sel.” on the Setup menu according to the input signal.
Why is my Sony VPL-VW60 Operating Instructions (VPL-VW60) power not turning on?
If your Sony Projector isn't powering on, try the following: After about one minute, try turning the power on. Ensure the lamp cover is securely closed and the screws are tightened. Also, make sure the filter holder is securely closed. Finally, check the warning indicators for any alerts.
What does 'High temp.! Lamp off in 1 min.' mean on my Sony VPL-VW60 Operating Instructions (VPL-VW60) Projector?
General| Device Type | Projector |
|---|---|
| Model | VPL-VW60 |
| Display Type | SXRD |
| Native Resolution | 1920 x 1080 |
| Contrast Ratio | Up to 35, 000:1 |
| Lamp Type | 200W UHP |
| Lens | 1.8x zoom lens |
| Noise Level | 22 dB |
| Weight | 11 kg |
| Inputs | HDMI x2, Component, S-Video, Composite |
Covers fire, shock risks, symbol meanings, and environmental disposal.
Details FCC compliance, testing, and operational conditions for the device.
Guidelines for proper disposal of the projector lamp.
Lists trademarks associated with the product.
Compliance information for customers in Canada, Netherlands, EU, and Taiwan.
Covers safe usage practices including voltage, liquid spills, and handling.
Advice on proper ventilation and cooling to prevent overheating.
Instructions on how to repack the projector for shipping or storage.
Details physical controls on the projector's front and right side.
Describes ports and features located on the projector's rear and bottom.
Details the buttons and functions of the projector's remote control.
Guide to unpacking the projector and inserting batteries into the remote control.
Advice on suitable installation locations, ventilation, and environmental factors.
Instructions for connecting video sources via component, HDMI, S-Video, and composite inputs.
Guide to connecting a computer using HDMI or VGA cables.
Explains how to adjust picture position using lens shift and projector controls.
Steps to select the desired language for on-screen menus.
How to power on the projector and select the input source for display.
Step-by-step procedure for safely shutting down the projector.
Explains various wide screen modes for aspect ratio adjustment.
Guide to selecting preset picture modes like Dynamic, Cinema, and User.
Covers direct adjustments for color, brightness, contrast, and sharpness via remote.
Adjusts color and hue independently for specific color targets in the projected image.
Instructions for using supplied software for advanced picture tuning.
Explains how to access and navigate the projector's on-screen menus.
Details options within the Picture menu for image quality adjustments.
Settings for screen area, aspect ratio, and signal adjustment.
Configuration options for system settings like language, cooling, and power saving.
Settings for HDMI Control, Auto Input Search, Test Pattern, and Background.
Settings related to projector installation, such as V Keystone and Lens Control.
Displays model name, signal frequency, and lamp usage hours.
Explains HDMI Control for synchronized operation with compatible equipment.
Provides solutions for common power and picture problems.
Explains status lights and on-screen warning messages.
Procedures for replacing the projector lamp and air filter.
Procedures for cleaning the air filter to maintain projector performance.
Lists detailed technical specifications of the projector.
Table showing supported preset video signals and frequencies.
Indicates which menu items are adjustable based on the input signal type.
Instructions and measurements for installing the projector on a ceiling.
Guide to fine-tuning horizontal picture alignment using lens adjustment.
To Next Page
