Sony VTX-D800U - B Board Removal; Chassis Removal

- 5 -
Service Manual
Remove the cover and front panel as indicated in [1-1] and [1-2]. Disconnect CN600 power cord and remove from
unit. Remove the 1 Philips screw from the rear panel. Remove the 3 Philips screws from the circuit booard. The B
board can then be lifted clear of the chassis.
[ 1.3 ] B Board Removal
==>
==>
==>
==>
CN600
Screw
Screw
Screws
To remove, lift the front of the chassis slightly to clear the stops and slide forward out of the bottom cover.
[ 1.4 ] Chassis Removal
Stops