Sony WALKMAN WMD-DT1 - Page 40

. INCORRECT CORRECT
3-5. Error Rate Measurement Mode=1 3-5. Error Rate Measurement Mode=1
e The error rate of the Ach or Bch is measured and the result
will be displayed on the LCD.
The error rate displayed can be selected by the BB/AVLS
key.
© Operate the keys in the same way as in the normal mode.
When CAUTION occurs, the error code and the mechanism
operation mode at that time will be displayed on the LCD.
¢ The error rate of the Ach or Bch is measured and the result
will be displayed on the LCD.
The error rate displayed can be selected by the BB/AVLS
key.
¢ Operate the keys in the same way as in the normal mode.
When CAUTION occurs, the error code and the mechanism
operation mode at that time will be displayed on the LCD.
(LCD display in the test mode) (LCD display in the test mode)
fol - Ge FY
Testno. Ach (£ for Bch) Error rate =0.0234 Testno. Ach (& for Bch) Error rate =0.0234
(LCD display when CAUTION occurs)
(LCD display when CAUTION occurs)
n?foe OF Ue Al Eb OF Ue
Error code
Mechanism operation mode Test no, Errorcode Mechanism operation mode
SECTION 5. IC PIN FUNCTION
sa”~ : indicates corrected portion.
INCORRECT CORRECT
IC503 SYSTEM CONTROL (CXP80620-457R)
' ' 1
1 ' 4 4
SEL
LOAD
Pin
for
CEPT
IRONS
Not
tape-up
when
i
I
H
WAKE-UP2 moe Wake-up signal inpu
1C503 SYSTEM CONTROL (CXP80620-457R)
[Pine | PinName | 10 |
SEL
LOAD
Pin
for
Selects
Not
tape-up
when
'
t
|
2
|
WAKE-UP2
Pot
|
Wake-up
signal
inpu
1
English
é . _ 93F0964-4
Sony
Corporation
Printed
in
Japan
9-957-590-91
General
Audio
Group
©
1993.6
Published by Audio Sector Quality Assurance Dept.
—9—