Need help?Do you have a question about the Sony XC-ST50 and is the answer not in the manual?
General| Lens Type | C-mount |
|---|---|
| Lens Mount | C-mount |
| Video Output | 1.0 Vp-p, 75 Ω |
| Power Supply | DC 12 V ±10% |
| Shutter Speed | 1/50 s to 1/100, 000 s |
| Power Requirements | DC 12V |
Overview of key capabilities including shutter, sync, mount, and physical attributes.
Comparison of technical specifications between XC-ST50/ST30 and XC-75/73 models.
Table detailing external sync modes (Normal, External Trigger, Restart Reset) for camera synchronization.
Details the pin assignment and function of the 12-pin connector for power and sync signals.
Explains the function and factory settings of the rear panel switches.
Specifies synchronization requirements for Normal video/shutter and Restart Reset/trigger modes.
Illustration and explanation of DIP switch functions for shutter control.
Describes the normal shutter mode for capturing high-speed moving objects.
Details the non-reset mode for external trigger shutter operation.
Details the reset mode for external trigger shutter operation.
Methods for setting shutter speed using DIP switch or trigger pulse width.
Details the voltage and timing specifications for the WEN signal.
How Restart Reset is used for long exposure to capture clearer images.
Details the timing and conditions for long exposure using Restart Reset.
Describes the timing and conditions for strobe light synchronization with exposure fields.
Details the timing of the vertical output signal for EIA interlaced frame integration.
Details the timing of the vertical output signal for CCIR interlaced frame integration.
Compares spectral response between XC-ST50/ST30 and XC-75/73 models.
To Next Page
