Sony XC-ST50 - System Configuration Details; Specifications Comparison

2
XC-ST50/50CE
XC-ST30/30CE
SYSTEM CONFIGURATION
The components making up the system based on XC-ST50/ST50CE or XC-ST30/ST30CE video camera are as
follows.
Tripod adaptor
VCT-ST70I (Isolated type)
Close-up ring kit
LO-77ERK
C-mount lenses
VCL-50Y-M
VCL-25Y-M
VCL-16Y-M
VCL-12YM
VCL-08YM
Junction box
JB-77
Video camera module
XC-ST50/50CE
XC-ST30/30CE
Camera adaptor
DC-700/700CE
Camera cables
CCXC-12P02N (2 m)
CCXC-12P05N (5 m)
CCXC-12P10N (10 m)
CCXC-12P25N (25 m)
SPECIFICATIONS COMPARISON
Image device
Effective picture elements
Lens mount
Scanning system
Sensitivity
Minimum
illumination
S/N ratio
Normal shutter
Dimensions
External trigger
shutter
Mass
Vibration resistance
1/2 type interline transfer CCD
768 (H) x494 (V)
C mount
2:1 interlaced
400 lx F8
0.3 lx
60db
1/100 to 1/10,000
44 (W) x29 (H) x57.5 (D) mm
110 g
10G (in the X, Y, and Z
directions at 20 to 200 Hz)
1/2 type interline transfer CCD
768 (H) x494 (V)
C mount
2:1 interlaced
400 lx F4
3.0 lx
56db
1/100 to 1/10,000
44 (W) x29 (H) x71 (D) mm
140 g
7G (in the X, Y, and Z
directions at 11 to 200 Hz)
1/3 type interline transfer CCD
768 (H) x494 (V)
C mount
2:1 interlaced
400 lx F8
0.3 lx
56db
1/100 to 1/10,000
44 (W) x29 (H) x57.5 (D) mm
110 g
10G (in the X, Y, and Z
directions at 20 to 200 Hz)
1/3 type interline transfer CCD
768 (H) x494(V)
C mount
2:1 interlaced
400 lx F4
3.0 lx
56db
1/100 to 1/10,000
1/4 to 1/10,000
Can be changed by the
trigger pulse width or rear
panel switch.
1/100 to 1/1,600
Can be changed by the
trigger and VD. Internal
setting needs to be changed.
1/4 to 1/10,000
Can be changed by the
trigger pulse width or
rear panel switch.
1/100 to 1/1,600
Can be changed by the
trigger and VD. Internal
setting needs to be changed.
44 (W) x29 (H) x71 (D) mm
140 g
7G (in the X, Y, and Z
directions at 11 to 200 Hz)
XC-ST50 XC-75 XC-ST30 XC-73
Optical
Ext. Sync.
Clear
1H delay
IR cut off
No delay
Clear
1H delay
IR cut off
No delay