SNMP Agent
This function makes the basic settings for SNMP. Click [Apply] to immediately apply the settings.
Item name Description Range or choices (under line: Ini-
tial value)
Enable/Disable Used to enable or disable the SNMP function. Enable
Disable
Port Used to enter the standby port number of the SNMP agent. 0 to 161 to 65535
SysContact Used to enter the system administrator information (including
email address).
Up to 64 ASCII code characters
SysLocation Used to enter the system location information. Up to 64 ASCII code characters
Community Setting List
This function makes the settings for MIB access from the SNMP manager. Click [Apply] to immediately apply the
settings.
Item name Description Range or choices (under line: Ini-
tial value)
Enable/Disable Used to enable or disable the SNMP community. Enable
Disable
Name Used to set the SNMP community name. Up to 64 ASCII code characters
public
Network Interface Used to display the corresponding network interface. XKS-C81XX: LAN1/1&LAN2/1
XKS-C91XX: LAN1-1/1&LAN1-2/1
Version Used to select the SNMP version. V1 & V2C
V2C
Continued
XVS-9000-C/XVS-8000-C/XVS-7000-C/XVS-6000-C
1-33
To Next Page
Loading...
